Hazard information (Regulation (EC) 1272/2008, CLP)




DANGER · Contains: xylene
Hazard statements:
- H226 Flammable liquid and vapour.
- H304 May be fatal if swallowed and enters airways.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H373 May cause damage to organs through prolonged or repeated exposure.
- H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements:
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P273 Avoid release to the environment.
- P280 Wear protective gloves, protective clothing, eye protection, face protection, hearing protection.
- P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P501 Dispose of contents/container at a hazardous or special waste collection point, in accordance with local, regional, national and/or international regulations.
Read the label and the safety data sheet before using the product.
ZINKER
ZINKER 98 % pure zinc – Cold galvanizing (96 % zinc in dry film)
ZINKER 98 % pure zinc – Cold galvanizing (96 % zinc in dry film)
Couldn't load pickup availability
ZINKER is a single-component cold galvanizing compound (zinc-rich paint) made in Spain by Galvanol Iberia S.L. It protects steel actively (cathodic) and passively (barrier), like hot-dip galvanizing, at a lower price than GALVANOL.
Composition and zinc percentage
- 96 % zinc in the dry film (ISO 3549).
- 98 % pure zinc.
- Composition: zinc, polymer and solvent. Matt grey colour.
Looking for 60 %, 65 %, 90 % or 92 % zinc paint?
Many zinc-rich paints on the market contain between 60 % and 92 % zinc in the dry film. The more zinc, the stronger the cathodic protection: ZINKER reaches 96 %. When comparing percentages, always check whether the figure refers to the dry film or to the weight of the liquid product.
Uses
- Repair of hot-dip galvanizing: welds, cuts and drilled holes.
- Steel structures, warehouses and solar parks.
- Marine industry and marine environments.
- Agricultural machinery, trailers and chassis.
- Railings, fences and metal gates.
Application
- Remove loose rust and old paint and degrease with xylene.
- Mix thoroughly before use and stir again every 20-30 minutes.
- Apply by brush, roller or spray gun, in 2-3 coats.
- Drying: 30-60 minutes per coat.
ZINKER or GALVANOL?
ZINKER is the choice for galvanic protection at a better price. GALVANOL is our premium reference: ≥96 % zinc, ISO 12944-6 tests in an ENAC-accredited laboratory and galvanizing repair according to ISO 1461 and ASTM A780.
Formats and storage
2, 5 and 10 kg formats and 400 ml spray. Unlimited shelf life in the original container (stir every 3 years). Store in a cool place away from direct sunlight.
Share
