Hazard information (Regulation (EC) 1272/2008, CLP)
DANGER · Contains: xylene
Hazard statements:
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H304 May be fatal if swallowed and enters airways.
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- H373 May cause damage to organs through prolonged or repeated exposure.
- H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements:
- P202 Do not handle until all safety precautions have been read and understood.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after use.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501 Dispose of contents/container at a hazardous or special waste collection point, in accordance with local, regional, national and/or international regulations.
Read the label and the safety data sheet before using the product.
GALVANOL
GALVANOL Spray 500 ml (Zinc Coating / Zinc-Rich Paint)
GALVANOL Spray 500 ml (Zinc Coating / Zinc-Rich Paint)
Couldn't load pickup availability
Purity zinc particle 99% according to ISO:3549 and content of 96% in dry layer and with ISO 1461:2022 and ASTM A780 regarding its use as a hot-dip galvanized repair coating
Certified tests:
JOINS EN ISO 12944:6/2018,
JOINS EN ISO:12944:1/2018,
[Thicknesses: C4 HIGH 93 microns, C4 VERY HIGH AND C5 HIGH 120 microns]
GALVANOL SPRAY is active galvanic-cathodic protection zinc coating for iron .
It is used to protect ferrous iron surfaces from corrosion; Repair of damage or imperfections on hot-dip galvanized; Replace hot dip galvanized; Recovery of active cathodic protection.
Product has the same formula and structure as the cans and buckets, even with the same amount of solvent, only packaged in spray and propylant added for its expulsion.
GALVANOL is an analogous product and at the same time a great complement and companion for hot-dip galvanizing, which has several corrosivity certificates in the world with spectacular results such as C5 ALTA according to ISO:12944-6/2018, it complies with only 121 microns of thickness. minimal stitch without any appearance of rust. (TESTED IN SPAIN) It is applied directly to iron, or to the previously hot-dip galvanized surface, or galvanized surface with the GALVANOL coating itself, it takes several years to recharge the active cathodic protection.
Before applying compound: Shake the spray for at least 1 minute until the ball is able to move freely inside.
P repair the surface: remove loose corrosion particles and remains of old paint, degrease with synthetic solvent or xylene, dry. Allowed to apply on dense rust.
When applying, you must keep the spray in the vertical position of the valve up to a distance of 25 to 30 cm from the surface to be protected. Apply at a room temperature between + 5°C to + 40°C.
At the end of application, clean the valve: turn to the spray and press the nozzle upwards until clean gas comes out. Remove the remains of compound from the valve with a cotton swab dipped in a solvent or xylene.
Keep away from direct sunlight at a temperature of -40°C to +40° and out of reach of children.
Net weight and the date of issue on the packaging.
S pray used disposed of as household waste.
Does not contain ozone-depleting substances.
Composition : zinc, polymer, solvent, propylene.
The useful life is 36 months.
