• GALVANOL 2 kg pintura rica en zinc
1 1

Hazard information (Regulation (EC) 1272/2008, CLP)

GHS02 FlammableGHS07 Irritant / harmfulGHS08 Health hazardGHS09 Environmental hazard

DANGER · Contains: xylene

Hazard statements:

  • H226 Flammable liquid and vapour.
  • H304 May be fatal if swallowed and enters airways.
  • H315 Causes skin irritation.
  • H319 Causes serious eye irritation.
  • H373 May cause damage to organs through prolonged or repeated exposure.
  • H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements:

  • P102 Keep out of reach of children.
  • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P273 Avoid release to the environment.
  • P280 Wear protective gloves, protective clothing, eye protection, face protection, hearing protection.
  • P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
  • P501 Dispose of contents/container at a hazardous or special waste collection point, in accordance with local, regional, national and/or international regulations.

The kit also includes Xylene Solvent 1 L, which has its own label and safety data sheet.

Read the label and the safety data sheet before using the product.

GALVANOL

GALVANOL 2 kg Application Kit – Everything you need for cold galvanizing

GALVANOL 2 kg Application Kit – Everything you need for cold galvanizing

€89,15 EUR
€99,06 EUR €89,15 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.

Everything you need to protect your metal structure in a single order, with a 10% discount compared to buying the items separately.

Includes

  • 1 × GALVANOL® 2 kg (96% zinc in dry film)
  • 1 × Xylene Thinner 1 L (for degreasing the surface and thinning if necessary)
  • 1 × VELOUR PRO 100% wool roller
  • 1 × 30 mm triple-cut brush (for corners and joints)
  • 1 × Super-fine grit sanding pad

Coverage

250 g/m² per coat (40 microns). With the recommended 2 coats, the 2 kg container covers approximately 4 m².

Application

  1. Remove loose rust and old paint with the sanding pad.
  2. Degrease with xylene and allow to dry.
  3. Mix GALVANOL thoroughly and apply with the roller and brush. Re-mix every 20–30 minutes.
  4. Allow to dry between coats (touch-dry in about 20 min at +20 °C). 2–3 coats recommended.

Complies with ISO 1461 and ASTM A780 as a hot-dip galvanized repair coating. Tested in ENAC-accredited laboratories according to ISO 12944.

View full details